Urgent electrical service
24/7 Emergency Electrician in San Francisco
For fire, smoke, ongoing arcing, a gas smell or a downed wire, move to safety and call 911. If part of your home has lost power or a circuit has failed without an immediate hazard, call Max Electric. Tell us the address and which rooms or equipment are affected.
Max Electric · California C-10 electrical contractor license #1148391
Smoke, fire, a suspected gas leak or a fallen power line
Stay clear of a fallen wire and anything it touches. Call 911, then PG&E at 1-800-743-5000. If the wire is touching a vehicle or blocking your exit, stay where you are if it is safe and follow the 911 dispatcher’s instructions. For a suspected gas leak, call from outside the affected area.
Keep people out of standing water near electrical equipment. If several buildings lose power and there are no signs of immediate danger, check the PG&E outage map. Read PG&E’s emergency instructions.
Who to call for a loss of power
| What you can observe safely | Who can help |
|---|---|
| Nearby buildings are dark | Report the outage to PG&E online or call its 24-hour outage line at 1-800-743-5002. A private electrician cannot restore power to the street. |
| Only your building, unit or several rooms lost power | Call Max Electric with the address. If you already know, say whether hall lights, neighboring units or other circuits have power. A single property can still have a utility-side problem. |
| A breaker trips again or a receptacle smells burnt | Stop using the affected equipment and keep clear. Call from a safe place. For smoke, fire or an immediate threat, call 911 first. |
| Power-dependent medical equipment has stopped | If someone’s health or safety is in immediate danger, call 911. Tell responders that the equipment has lost power. Do not wait for an electrician to arrive. |
What to tell the person taking the call
Lead with the address and the safest number for a callback. Then describe the last thing you noticed, the area affected and whether anyone relies on electrical equipment that has lost power. If emergency services or the utility are already on site, tell us who controls access.
You do not need to identify the failed component. Leave covers in place and keep people away from damaged or wet equipment. A description from a safe location is enough for the first conversation.
Once the area is safe, tell the dispatcher if the service equipment is outdoors or in a locked meter room. In an apartment building, the property manager may need to meet the electrician.
What happens on an urgent service visit
Assess the affected equipment
We check the nature and extent of the fault and identify which equipment must remain isolated. An outage in one area may have a different cause from an entire building going dark.
Restore what can operate safely
A limited repair may restore some or all service. Damaged gear, utility involvement or unavailable parts can require a later permanent repair.
Plan the follow-up
We explain any restrictions, the work still needed and who must authorize it. A building manager should know which tenants or systems remain affected.
When the urgent visit ends with part of the property still off
Before the electrician leaves
Ask which rooms or equipment must stay out of use. If a tenant or a night shift is taking over, pass on the exact locations and the contact for follow-up.
Before other trades arrive
Tell the restoration crew or building manager who will authorize a return visit. A space can be ready for cleanup before its electrical equipment is ready to use.
If you are calling for a property you manage
One unit reported the fault
Give the unit number and the resident’s callback details with their permission. A safe report of whether the common corridor and nearby units still have power helps us identify the likely scope.
A shared system stopped
Tell us if stairs, corridor lights, entry equipment or multiple tenants are affected. Identify who can authorize access and how the electrician can reach the common electrical room. If an immediate life-safety hazard exists, contact emergency services first.
Getting power back
A Max Electric customer shares what happened when the power went out. If you have an urgent electrical fault, call (415) 406-3076 to check availability.
Dispatch and access
Can you promise a specific arrival time?
Call for current availability. The address, active hazards, access to the property and existing calls affect dispatch.
Can a tenant make the call?
Yes. Describe the situation and provide a building contact if repairs or access to shared equipment require authorization.
Should I submit the estimate form for an active fault?
Telephone is the appropriate route for urgent dispatch. Use the form for planned follow-up after the immediate situation has been addressed.
How much is an after-hours visit?
Ask about the callout charge, what the initial diagnostic visit covers and how additional work is approved. The dispatcher can discuss current terms for your address. Parts or a second visit may be needed if service cannot be safely restored on the spot.
Arrange follow-up electrical work
For non-urgent follow-up, share the address, what happened, any areas taken out of service and a contact who can grant access. For an active emergency, call.


